Tuesday, July 26, 2011

Banana Brownie Shish Kebabs

This recipe actually came to me in the middle of the night while I was up nursing my son. It’s good to know that my brain not only comes up with some pretty crazy dreams, but can also process recipes at night.

I love adding chocolate chips to my banana nut muffins, so the idea of adding bananas to brownies makes perfect sense for my palate.

These brownies are really rich, chocolately, gooey, and full of banana flavor.

Here’s the recipe:

Banana Brownie Shish Kebabs

1 stick butter
½ cup unsweetened cocoa (I’m a big fan of Hershey’s)
¾ cup sugar
2 eggs
¾ cup flour
1 t vanilla
½ cup chopped nuts ( I used walnuts and pecans)
½ cup chocolate chips
2 bananas

For Shish Kebabs:
wooden skewers
whipped cream or Cool Whip
1 banana

1. Preheat oven to 350 degrees.

2. Put butter in a bowl and microwave about 45 seconds until just melted. Add cocoa and sugar immediately and beat well.

3. Add vanilla and 2 mashed bananas into chocolate mixture and mix again.

4. Add eggs one at a time and mix after each one. Your batter will have a nice shiny look to it now.

5. Add flour and mix on high one final time until batter is as smooth as batter with bananas will be, i.e. slightly lumpy.

6. Pour into greased ( I grease with butter) 9 x 9 or 9 x 13 baking dish. I used the larger dish so that I would have a flatter brownie for the kebabs. Bake 30-35 minutes, or until a toothpick comes out clean.

7. When cool, cut brownies into 1 inch squares. Layer brownies and banana slices onto skewers with whip cream in between each slice. For a party, take a jar and fill it with something heavy, like whole nuts and then put your finished skewers in the jar like pencils. Enjoy!

Friday, July 15, 2011

Colorful Baby Onesie Sew-ons

I love little baby shirts with pictures of animals and vehicles on them. Many of them that you find in the store even look homemade…

But, they aren’t. So why not make them myself instead? It really can’t be that difficult to make.

I decided to use Wunderunder fusible web, since I had used a lot of this heat-bonding material in the past and it always worked great. I made some stockings for Christmas and am currently illustrating a children's book using fusible web and various material. I know the pros and cons of such a product. The main advantage is that it is super easy to use, the disadvantage is that it can start to peel after awhile.

Baby outfits, especially onesies, are washed a lot. I knew that if I used Wunderunder, I would also need to sew around the edges to prevent fraying and peeling over time.

So, I decided to make some simple patterns which I could sew up quickly. Babies grow really fast, and I figured, that if I didn't get something finished within a couple of weeks, it probably wouldn't fit my baby anymore.

Here are the first two onesies that I made and the How to:

1. Prewash your onesie and iron it flat.

2. On a sheet of paper, draw the pattern that you would like to use. Simple items, like cars, animals, and shapes are good to start with. Make sure that your pattern is the right size for your onesie. I decided on a simple dog and a more complicated frog. If you are not good at drawing, find some simple designs in a children’s book.

3. Take a piece of white paper, lay it over your pattern and trace the large areas that you will need to cut out. Remember, any fine details, you will need to sew on later. Mark an X on each area and cut them all out (The X is so that you remember later which side is up).

4. Cut out squares of your material making sure that you have enough for your pattern. Cut out a piece of Wunderunder the same size and iron it on to the material following the package instructions. Let cool.

5. Lay the paper cut-outs in reverse on your fabric with the Wunderunder paper side up, trace them, and then cut them out.

6. Peel off Wunderunder paper backing and iron the material pieces onto the onesie.

7. Now, you will need to take a needle and thread and sew around all of the edges of your pattern so that even if it peels later, it will stay put. You can also add little details, like eyes, shadows, and hair if you’d like. I had to add quite a bit of stitching on my frog, but my dog went very quickly. I always double my thread to make the lines darker.

8. Once your stitching is finished, iron over your pattern one more time. Finished!

Depending on your pattern and the material you use, your onesie may not make it through a thousand poopy washloads. However, if your child grows as fast as mine does, your onesie will probably look great long enough.

Monday, July 11, 2011

Toddler Food Strike Pineapple Tuna Salad

I love to cook. So, why does my toddler refuse to eat everything, even foods he used to love?

I guess, that’s normal. At least, that’s what it says online. Although, it sure is frustrating!

After trying to give him more finger foods, which he would promptly hand back to me and say “Mama” (meaning - Mama, you eat it) or throw on the floor, I tried to feed him myself. But, if it wasn’t oatmeal, he would just push my hand away or spit it out. I was flustered.

I never would have thought that tuna salad would do the trick, but he ate it… all of it! I think the key was, it was thick enough that he could spoon it out himself, soft enough, that the texture didn’t bother him, and sweet enough that he liked it. He could also dip crackers in it, which is a plus. Yeah! Finally something worked.

So, now that I know he likes tuna salad, I decided to try to make a version which is a bit healthier and which adds in some fruit. I like the fact that it has less mayonnaise and some healthy yoghurt instead. I’m sure you could also make a chicken salad that is similar, maybe even with some applesauce. I gave him this pineapple tuna salad for lunch today with crackers and he didn’t complain a bit. He actually said, “Yum!”

Pineapple Tuna Salad (4 toddler portions)

1 6 oz can tuna w/water
1 T plain yoghurt
1 T mayonnaise
1 T sweet pickle relish
1 T crushed pineapple

1 Handful cheese fish crackers, or other crackers for dipping.

1. Open tuna and drain water. Add to bowl.

2. Mix in yoghurt, mayonnaise, relish, and pineapple. Mix well.

3. Add 1/3 of tuna salad to a small plastic bowl.

4. Serve with cheese fish crackers.

This recipe couldn’t be easier. Let me know if your toddler eats it or if you have other great dishes that worked during your toddler’s food strike.

Monday, June 27, 2011

Nursing Scarf

It’s hot outside, at least 100 degrees.

I really feel sorry for those babies out there who are being nursed under heavy wool blankets. That’s gotta be hot and uncomfortable. Nevertheless, nursing out in the open just doesn’t seem appropriate in small town USA.

I have seen different kinds of nursing cover-ups, some more practical than others. I decided to make my own with what I find nice – comfort for baby, light and airy for both of us, and, if possible, a little bit stylish.

Hmmm…

Then, one evening it dawned on me. I have a zillion unused summer scarves from Germany that I once wore a lot, but now are just sitting up on a shelf. If I cut these scarves in half, I could use the one half as a cover up for the baby, and make ties out of the other half to go around my neck. Here is the first nursing scarf that I came up with. I love this scarf, because of the tassels and am happy that it now has a new use. In the picture, you can see me using this new scarf at the zoo. It worked great!

Here’s the how to:

1. I put the scarf over my shoulder and made sure that I had enough length to cover a nursing baby and marked this spot. I then cut the scarf horizontally at this point.

2. With the remaining material, I cut out two long strips of fabric about 2 inches wide. Then, I folded each strip on the reverse side and sewed along the edge, leaving about a quarter of an inch. I turned each strip back ride side front and ironed them flat. Now, I had the ties for my neck.

3. Now, take the ties and lay them lengthwise on the fabric, so that the open end is even with the rough end of the scarf that was cut and pin in place. Make sure the ties are at least a foot apart, so that you can look between them later to see your baby. My scarf was pretty wide, so I also had at least 6 inches left between the tie and the sides of the scarf. Now, sew the entire top of the scarf including the ties down about a quarter of an inch.

4. Take the end where you just sewed and fold it down again about an inch to an inch and a half and sew once along the bottom of the fold and once on the top. If you want to cinch your scarf later, or add some wire to make it more stable (you can by special wire in fabric for this at a fabric store), you have a place to do so.

5. Finally, Put the ties around your neck and tie them in a knot. Now flip the scarf over one shoulder and you are ready to nurse in style.



Friday, June 10, 2011

Homemade Travel Crib Mattress Pad

My husband and I decided to get a baby travel crib to use as a baby crib for Lukas’s first few months. Our apartment is not very large, and a travel crib has a lot of advantages: Firstly, it doesn’t take up much space. Secondly, you can push it around from room to room. Thirdly, it is much cheaper than a brand new bassinet/crib. And, finally, it’s high enough that our 19 month old can’t reach well into it. The one disadvantage? The mattress was very hard and sunk in a bit in the middle.

The solution ended up being a combination of flattening out the bed by adding a piece of cardboard and a blanket under the mattress and adding a mattress cover. The problem was only that they don’t make mattress covers for baby travel cribs. Therefore, I decided to sew one up myself.

I decided to use a similar concept to the baby pillows that I made for Jonas. They have just enough fluff to be comfortable, but are flat enough to be safe. I also added some fold over corners to the cover so that it would stay on the mattress, another safety guard.

I think the resulting cover is so cute, it is really a shame that you have to put a sheet over it. Maybe, when he’s a bit older, I’ll just leave it in the bottom of the playpen.

Here’s the quick and easy how to:

1. Measure your playpen/travel bed so that you know how big to make your mattress cover. Then cut out 2 pieces of material, plus 2 pieces of thin polyester backing adding a half inch to each side.

2. Now cut out 4 square pieces of material, about 8 x 8 inches. Fold material in half with the nice side on the outside.

3. Lay down the pieces as follows: First one piece of material with the good side facing up. Now add the triangles to each corner, so that the two open ends of the triangle are facing the corner. Then, add your next piece of material with the good side facing down. Finally, lay the polyester backing down on top. If you have difficulties sewing over polyester backing, add a layer of newspaper to this, which you can tear off later. Add stick pins around the entire square to hold.

4. Leaving about a half inch all the way around, sew around the rectangle until you are about 4-6 inches from where you started. Now turn the entire piece inside out, so that the right side of the material is now on the outside, and the polyester backing on the inside. You will see that the triangles can be folded to either side.

5. Finally, sew up the remaining 4-6 inches by hand and you are finished.

When I added this mattress pad to our crib, my baby finally slept “like a baby.” If you need a temporary crib or travel a lot, consider making your own mattress pad.

Saturday, May 14, 2011

Baby Break

Lukas Jacob is here!

Lukas Jacob Donner was born at 6:06 p.m. on Sunday, May 8, 2011.



Hello everyone,

I just wanted to let all of my readers know, that I will be taking a blog break for the month of May. I gave birth to a beautiful healthy baby boy on Mother's Day and think it's time to take a little break from blogging to just enjoy my little guy. Lukas and I are now home recuperating and just enjoying our time together, now as a family of four.

See you soon!

Kelley

Friday, April 29, 2011

Movable Door Height Marker

When I was a little girl, the door frame to my bedroom was covered in marks depicting not only my height at various ages, but also the height of my friends and even my stuffed animals. Even after I stopped growing, I loved looking at it and seeing what years I really shot up and who I was friends with at different times. There was so much history on such a short little space.

Now that Jonas is getting older, I wanted to have a place where I could also mark his height. Unfortunately, I've moved so many times in the last few years that I really doubt that it makes sense to use a door frame. So I decided to make a door height marker that I could take with me from one place to the next.

This movable door height marker is made out of material and is a bit different than the one on my bedroom door. I love the visual of seeing how much one grows during each year, because it varies so greatly. Therefore, I decided to cut and sew a piece of material for the first year and then to add pieces of material which extend from this piece for every year after that.

At the moment, I only have two pieces of material for Jonas, since he is only 18 months old. The first is 21.3 inches long, his birth height, and the second is 9.7 inches, since he was 31 inches at one year (21.3 + 9.7 = 31). On his second birthday, I will add a third piece of material to his marker.

This door height marker can be hung in a door frame, or hung on the wall until the child is a bit older. If you have more than one child, you could hang them next to each other to compare heights. Maybe someday I will sew this one into a quilt and give it to my child when they go off to college, have their own child, etc...

Here is the how to:

1. Cut a piece of material which is four and a half inches wide and so long as your child was at birth plus at least a half an inch. Turn the insides of the material together and sew along the edges with about a quarter inch remaining, leaving the top open. Now turn it back right side in, fold in the top edges a quarter inch and leaving the top open, sew around these edges or iron them down with heat bonding tape. Iron flat.

2. Iron Wonderunder to a contrasting fabric and then cut out the name of your child and how tall they were at birth. Iron this onto your material. Your first piece is finished!

3. For every year your child is old, add another piece of contrasting material and the age of the child. Eventually, your door height marker will be very colorful and a great way to remember how small your child once was.